Hefei Kiwi Heavy Machinery Co., Ltd.
Hefei Kiwi Heavy Machinery Co., Ltd.
Add to Cart
Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations
European wire rope hoist main parameters table
| model | VTW-S 10T | ||
| SWL | t | 10 | |
| lifting height | m | 6-18 | |
| lifting speed | m/min | 0.8/5.0 | |
| travel speed | m/min | 5-20 | |
| power in | V;HZ | 220~460V 50/60Hz | |
| FEM(GB) | -- | 2m(M5) | |
| lifting motor | power | KW | 1.5/9.5 |
| RPM | n/min | 430/2900 | |
| insulation | -- | F | |
| production | -- | IP55 | |
| duration | -- | 40% | |
| rated current | 5.17/14.20 | ||
| lift gear ratio | -- | 119.8 | |
| drum dia | mm | 268 | |
| wire rope | -- | 11-8*26(WS)+IWRC | |
| travel motor | power in | KW | 2-0.4 |
| RPM | n/min | 133 | |
| insulation | -- | F | |
| production | -- | IP55 | |
| duration | -- | ||
| rated current | A | 2.5 | |
| wheel dia | mm | 125 | |
European wire rope hoist description
High Safety
Dual Braking System: In addition to the brake built into the motor, a safety brake is usually installed on the low-speed shaft (drum side) as a redundancy backup, significantly increasing safety.
Multiple Limit Protections: Standard upper and lower limit switches (helical or counterweight type) prevent overshooting or excessive lowering. An overload limiter is also typically included, automatically cutting off operation when the load exceeds 105% of the rated load, protecting equipment and personnel safety
Thermal Protection: The motor has a built-in thermal protection device to prevent motor burnout due to frequent starts and stops or overload
Modular Design and Convenient Maintenance
All major components (such as the motor, gearbox, drum, and brake) adopt a modular design.
Direct Benefits: Installation, commissioning, maintenance, and spare parts replacement are very convenient, greatly reducing downtime for maintenance.
Company Introduction
Hefei Kiwi Heavy Machinery Co.,ltd is located in Feidong County, Hefei City, Anhui Province. The company was established in 2010. It is a professional manufacturer and service provider of lifting machinery, material handling and various non-standard equipment products. It is committed to the development and research of crane and logistics handling technology. It inherits the advanced European design concept and perfect process flow.